Skip to content
Takashi Blue Silicone Hose 90 Degree Reducing Elbow 5" To 4½" (127to114mm)

Takashi Blue Silicone Hose 90 Degree Reducing Elbow 5" To 4½" (127to114mm)

by Takashi
SKU TSH-90RE127114-BU
$0.00 - $0.00
$0.00
$51.90
$51.90 - $51.90
$51.90
Availability:
in stock, ready to be shipped


Blue Silicone
90 Degree Reducing Elbow
4½ to 4 Inch I.D. – 5 Inch x 5 Inch Long
114 to 101mm I.D. – 125mm x 125mm Long
Premium Quality – Super Low Prices

Available (1) Black or (2) Blue:

  • Application: The 127mm to 114mm reducing elbow steps down from 5" to 4½" piping while also making a 90 degree directional change. This is used on big bore turbo intake systems and large intercooler piping runs where the pipe diameter needs to step down (commonly at the throttle body, turbo outlet, or after the intercooler) and the routing also needs to turn 90 degrees in a tight space.

  • Why Reducing Elbow Over Two Parts: Combining the reduction and the bend into one piece saves a clamp joint, reduces potential leak points, and is shorter than running a straight reducer plus a separate elbow. On big bore plumbing where space is often tight, this matters for fitment and reliability under boost.

  • Confirmed Specs: 5mm wall thickness with 4-ply reinforcement. Rated 43 to 130 PSI working pressure with a 275 PSI burst rating. Temperature range of -60°C to 260°C. UV, water and ozone resistant. These specs give solid safety margin for sustained boost on serious performance builds.

  • Direction of Flow: This elbow can be installed either direction, with the 5" end going first or the 4½" end going first depending on where the reduction needs to sit in your pipework. Most commonly the larger end faces the airflow source (turbo outlet or intercooler) and the smaller end feeds toward the throttle body.

  • What to Pair With It: You will need a clamp suited to around 137mm O.D. for the 5" end and a clamp suited to around 124mm O.D. for the 4½" end, as the outside diameter of Takashi silicone hose is roughly 10mm larger than the inside diameter. T-bolt clamps are essential at these diameters under boost as worm drive clamps do not apply enough even pressure on large silicone to hold reliably.

  • Practical Buyer Tip: Confirm both pipe diameters before ordering. The 5" end must connect to true 127mm O.D. pipework and the 4½" end to true 114mm O.D. pipework. Aftermarket intercooler kits sometimes use slightly different actual diameters than their nominal labels, so measuring the actual pipe O.D. is the only reliable check.

Important Note:
(1) Blue Silicone Hose – Blue on the Outside and Blue on the Inside
Blue Hose has White Takashi logo on the Outside
Some part nos. of Blue Hose have no logo
(2) Black Silicone Hose – Black on the Outside and Blue on the Inside
Black Hose has no logo

Takashi Premium Quality Hand Made Hose - The Very Best Costs Less

http://performancewarehouse.com.au/ebay/Takashi-Silicone-Hoses-banner.jpg

Precision manufactured from high grade silicone to ensure outstanding temperature resistance.
Takashi Silicone Hoses are perfect for cooling/heating and charged air applications. They are long lasting and perform brilliantly under extreme conditions.
Takashi Silicone Hoses are an inexpensive and practical performance modification suitable for all types of vehicles.
Takashi Silicone Hose is ideal for motor vehicles and for the serious motorsport enthusiast who wants only the best.

Blue Hose has Takashi logo imprinted thereon.
Black Hose is plain with no logo.

We ship via Parcel Post with tracking

To ensure reliable delivery we ship via Australia Post.
Order by 2pm to be dispatched the same day (conditions apply).