Takashi Black Silicone Hose 90 Degree Reducing Elbow 2¼" To 2" (57to51mm) Turbo

Black Silicone
90 Degree Reducing Elbow
2¼ to 2 Inch I.D. – 5 Inch x 5 Inch Long
57 to 51mm I.D. – 125mm x 125mm Long
Premium Quality – Super Low Prices

Available (1) Black or (2) Blue:

• Application: This 90 degree reducing elbow suits turbo intake and intercooler systems on smaller four-cylinder turbocharged engines where the charge pipe needs to make a sharp 90 degree turn and step down from 57mm to 51mm in a single fitting. Common on Japanese and European factory turbo vehicles where the intake or intercooler routing changes direction and reduces in diameter at the same point in a confined engine bay.

• Size Context: The 57mm to 51mm reduction is a small 6mm step down across a 90 degree turn. This is a compact format fitting suited to smaller factory turbo builds and mild performance upgrades on four-cylinder engines. It is one of the smaller sizes in the Takashi reducing elbow range and is most relevant to builds where pipe sizing is compact throughout the entire charge pipe system.

• Temperature and Pressure Rating: Rated from -48 degrees C to 260 degrees C with a working pressure of 275 PSI. Handles the heat and boost pressure demands of factory and mildly modified turbo applications where standard rubber elbows crack, harden or collapse over time in high-heat engine bays.

• Construction Note: 5mm wall thickness with multi-ply silicone reinforcement throughout. Black exterior with no logo for a clean finish. The blue interior liner is standard Takashi construction and is not a defect.

• Fitment Note: The inlet end connects to pipes with an outside diameter of approximately 57mm and the outlet end connects to pipes with an outside diameter of approximately 51mm. Because the size difference between the two ends is only 6mm, measure both connection points carefully before ordering. It is easy to confuse this elbow with the same-diameter 57mm or 51mm standard elbows if measurements are not taken accurately.

• What to Pair With It: Use with a 57mm T-bolt clamp on the inlet end and a 51mm T-bolt clamp on the outlet end. T-bolt clamps are recommended over worm-drive clamps for all turbo and intercooler connections to ensure consistent clamping force under boost pressure.

• Practical Buyer Tip: Before ordering this reducing elbow, confirm that your pipe run requires both a 90 degree direction change and a size reduction at the same point. If your pipe only needs a direction change at 57mm with no size reduction, the Takashi 57mm 90 degree standard elbow is the correct fitting. If you only need a size reduction with no direction change, a straight reducer would be more appropriate. This elbow specifically handles both requirements at once.

Important Note:
(1) Blue Silicone Hose – Blue on the Outside and Blue on the Inside
Blue Hose has White Takashi logo on the Outside
Some part nos. of Blue Hose have no logo
(2) Black Silicone Hose – Black on the Outside and Blue on the Inside
Black Hose has no logo

Takashi Premium Quality Hand Made Hose - The Very Best Costs Less

Precision manufactured from high grade silicone to ensure outstanding temperature resistance.
Takashi Silicone Hoses are perfect for cooling/heating and charged air applications. They are long lasting and perform brilliantly under extreme conditions.
Takashi Silicone Hoses are an inexpensive and practical performance modification suitable for all types of vehicles.
Takashi Silicone Hose is ideal for motor vehicles and for the serious motorsport enthusiast who wants only the best.

Blue Hose has Takashi logo imprinted thereon.
Black Hose is plain with no logo.