Takashi Black Silicone Hose 90 Degree Standard Elbow 2¼" (57mm) Air Intake Turbo

Black Silicone
90 Degree Standard Elbow
2¼ Inch I.D. – 5 Inch x 5 Inch Long
57mm I.D. – 125mm x 125mm Long
Premium Quality – Super Low Prices

Available (1) Black or (2) Blue:

• Application: The 57mm (2.25 inch) 90 degree standard elbow suits turbo compressor outlet routing, intercooler inlet and outlet connections, and cold air intake systems on smaller four-cylinder turbocharged engines where the pipe needs a sharp 90 degree direction change at 57mm without any reduction in diameter.

• Size Context: At 57mm I.D., this is a compact elbow suited to factory turbo setups and mildly modified four-cylinder builds where the charge pipe system runs at 57mm throughout. It is commonly found on Japanese and European turbocharged vehicles where the factory intake or intercooler routing requires a 90 degree turn at this specific diameter. If your existing pipe measures 57mm OD, this is the correct elbow rather than forcing a 51mm or 63mm fitting onto a pipe it was not designed for.

• Temperature and Pressure Rating: Rated from -48 degrees C to 260 degrees C with a working pressure of 275 PSI. Handles the heat and boost pressure demands of factory and mildly modified turbo applications where standard rubber elbows crack, harden or collapse over time in high-heat engine bays.

• Construction Note: 5mm wall thickness with multi-ply silicone reinforcement throughout. Black exterior with no logo for a clean engine bay finish. The blue interior liner is standard Takashi construction and is not a defect.

• Fitment Note: Both ends of this elbow connect to pipes with an outside diameter of approximately 57mm. Confirm your pipe OD at both connection points before ordering. Factory rubber elbows at this size often have thicker walls which can make the internal bore appear different to the actual pipe OD. Always measure the pipe itself rather than the old hose.

• What to Pair With It: Use with a 57mm T-bolt clamp at each end. T-bolt clamps are recommended over worm-drive clamps for all boost pressure connections to ensure consistent clamping force under boost.

• Practical Buyer Tip: The 57mm 90 degree elbow is a direct replacement for factory rubber elbows on many Japanese turbocharged four-cylinder vehicles. If you are replacing a cracked or collapsed rubber elbow at a 90 degree routing point, check that your pipe OD is 57mm before ordering. If your setup also needs a size change at the same point, the Takashi 90 degree reducing elbow range includes combinations that connect to 57mm piping on one end.

Important Note:
(1) Blue Silicone Hose – Blue on the Outside and Blue on the Inside
Blue Hose has White Takashi logo on the Outside
Some part nos. of Blue Hose have no logo
(2) Black Silicone Hose – Black on the Outside and Blue on the Inside
Black Hose has no logo

Takashi Premium Quality Hand Made Hose - The Very Best Costs Less

Precision manufactured from high grade silicone to ensure outstanding temperature resistance.
Takashi Silicone Hoses are perfect for cooling/heating and charged air applications. They are long lasting and perform brilliantly under extreme conditions.
Takashi Silicone Hoses are an inexpensive and practical performance modification suitable for all types of vehicles.
Takashi Silicone Hose is ideal for motor vehicles and for the serious motorsport enthusiast who wants only the best.

Blue Hose has Takashi logo imprinted thereon.
Black Hose is plain with no logo.