Takashi Black Silicone Hose 90 Degree Standard Elbow 3" (76mm) Air Intake Turbo

Black Silicone
90 Degree Standard Elbow
3 Inch I.D. – 5 Inch x 5 Inch Long
76mm I.D. – 125mm x 125mm Long
Premium Quality – Super Low Prices

Available (1) Black or (2) Blue:

• Application: The 76mm (3 inch) 90 degree standard elbow is one of the most commonly used elbows in performance turbo builds. It suits intercooler inlet and outlet connections, turbocharger compressor outlet routing, and cold air intake systems on modified six-cylinder and V8 engines where the charge pipe needs to make a sharp 90 degree direction change while maintaining a full 3 inch diameter throughout.

• Size Context: At 76mm I.D., this is the most popular elbow size for Australian performance builds running 3 inch charge pipe systems. It is the correct elbow for any 76mm pipe run that requires a 90 degree turn without a size change. If your intercooler kit or turbo pipe system is built around 3 inch piping, this is the standard elbow to use at direction change points.

• Temperature and Pressure Rating: Rated from -48 degrees C to 260 degrees C with a working pressure of 275 PSI. Handles the sustained heat and boost pressure of performance turbo and intercooler systems without cracking, hardening or collapsing under load.

• Construction Note: 5mm wall thickness with multi-ply silicone reinforcement throughout. Black exterior with no logo for a clean engine bay finish. The blue interior liner is standard Takashi construction and is not a defect.

• Fitment Note: Both ends of this elbow connect to pipes with an outside diameter of approximately 76mm. Confirm your pipe OD at both connection points before ordering. Aftermarket intercooler kits and turbo pipe systems are commonly built to 76mm but actual pipe OD can vary slightly between brands and fabricators.

• What to Pair With It: Use with a 76mm T-bolt clamp at each end. T-bolt clamps are recommended over worm-drive clamps for all intercooler and charge pipe connections to ensure consistent clamping force under boost pressure.

• Practical Buyer Tip: The 76mm 90 degree elbow is one of the highest demand sizes in any silicone hose range because 3 inch intercooler piping is the most common size on modified Australian performance vehicles. If you are building or replacing a full intercooler pipe kit, order the elbows and straight sections at the same time to ensure consistent construction and wall thickness throughout the system.

Important Note:
(1) Blue Silicone Hose – Blue on the Outside and Blue on the Inside
Blue Hose has White Takashi logo on the Outside
Some part nos. of Blue Hose have no logo
(2) Black Silicone Hose – Black on the Outside and Blue on the Inside
Black Hose has no logo

Takashi Premium Quality Hand Made Hose - The Very Best Costs Less

Precision manufactured from high grade silicone to ensure outstanding temperature resistance.
Takashi Silicone Hoses are perfect for cooling/heating and charged air applications. They are long lasting and perform brilliantly under extreme conditions.
Takashi Silicone Hoses are an inexpensive and practical performance modification suitable for all types of vehicles.
Takashi Silicone Hose is ideal for motor vehicles and for the serious motorsport enthusiast who wants only the best.

Blue Hose has Takashi logo imprinted thereon.
Black Hose is plain with no logo.