Takashi Black Silicone Hose 90 Degree Standard Elbow 3½" (89mm) Air Intake Turbo

Black Silicone
90 Degree Standard Elbow
3½ Inch I.D. – 5 Inch x 5 Inch Long
89mm I.D. – 125mm x 125mm Long
Premium Quality – Super Low Prices

Available (1) Black or (2) Blue:

• Application: The 89mm (3.5 inch) 90 degree standard elbow suits intercooler piping, turbo charge pipe systems, and high-flow intake routing on performance six-cylinder and V8 builds where the pipe needs a sharp 90 degree direction change at 89mm without any reduction in diameter. It is a commonly used size on modified Australian performance vehicles running 3.5 inch charge pipe systems throughout.

• Size Context: At 89mm I.D., this elbow sits between the widely used 76mm and the larger 101mm sizes. It is the correct elbow for builds where the entire charge pipe run is 89mm and a same-diameter 90 degree turn is required. A 76mm elbow would restrict the flow, and a 101mm elbow would not seal correctly on 89mm piping.

• Temperature and Pressure Rating: Rated from -48 degrees C to 260 degrees C with a working pressure of 275 PSI. Built to handle the sustained heat and boost pressure of performance turbo and intercooler systems without cracking, hardening or collapsing under load.

• Construction Note: 5mm wall thickness with multi-ply silicone reinforcement throughout. Black exterior with no logo for a clean engine bay finish. The blue interior liner is standard Takashi construction and is not a defect.

• Fitment Note: Both ends of this elbow connect to pipes with an outside diameter of approximately 89mm. Confirm your pipe OD at both connection points before ordering. Aftermarket intercooler kits and turbo pipe systems are often described as 3.5 inch but actual pipe OD can vary between brands. Measure directly rather than relying on the kit description alone.

• What to Pair With It: Use with an 89mm T-bolt clamp at each end. T-bolt clamps are recommended over worm-drive clamps for all intercooler and charge pipe connections to ensure consistent clamping force under boost pressure.

• Practical Buyer Tip: The 89mm 90 degree elbow is the correct choice when your pipe run needs a sharp turn and your system is built around 3.5 inch piping throughout. If you also need a size change at the same location, look at the Takashi 90 degree reducing elbow range instead. Choosing a standard elbow when a reducing elbow is needed, or vice versa, is one of the most common ordering mistakes on custom turbo builds.

Important Note:
(1) Blue Silicone Hose – Blue on the Outside and Blue on the Inside
Blue Hose has White Takashi logo on the Outside
Some part nos. of Blue Hose have no logo
(2) Black Silicone Hose – Black on the Outside and Blue on the Inside
Black Hose has no logo

Takashi Premium Quality Hand Made Hose - The Very Best Costs Less

Precision manufactured from high grade silicone to ensure outstanding temperature resistance.
Takashi Silicone Hoses are perfect for cooling/heating and charged air applications. They are long lasting and perform brilliantly under extreme conditions.
Takashi Silicone Hoses are an inexpensive and practical performance modification suitable for all types of vehicles.
Takashi Silicone Hose is ideal for motor vehicles and for the serious motorsport enthusiast who wants only the best.

Blue Hose has Takashi logo imprinted thereon.
Black Hose is plain with no logo.